Power-On - Huawei JUPITER-3000K-H1 Smart User Manual

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
● Wear personal protective equipment and use dedicated insulated tools to avoid
electric shocks or short circuits.
● During operations, wear personal protective equipment such as protective
clothing, insulated boots, safety helmets with face shields, and insulated gloves.
● Only professional O&M personnel are allowed to operate in the STS to avoid
personal injury caused by improper operations.
● Before power-on, ensure that the STS is installed securely, all its internal
components are installed, and the check before power-on is complete.
● Immediately stop any operation when an exception occurs. Proceed with the
operation only after the exception is rectified.
● Before power-on, place insulation pads under the operation positions.
● The transformer must be powered on by two persons. One person operates the
transformer, and the other uses the insulation rescue hook to hold the operator.
In the case of any exceptions, the operator shall be quickly pulled away from
the equipment.
● STSs are interlocked and must be configured based on the STS installation
sequence.
● Only O&M personnel can perform operations, and other personnel must stay
more than 10 m away from the STS.
Issue 02 (2023-09-30)
D ANGER
D ANGER
CA UTION
Copyright © Huawei Technologies Co., Ltd.

4 Power-On

4
Power-On
57