Dell PowerConnect 3324 User Manual page 179

• Configuration Download File Destination—Indicates the destination file to which to
the configuration files is downloaded. The possible field values are:
– Running Configuration—Downloads commands into the Running Configuration
files.
– Startup Configuration—Downloads the Startup Configuration file and
overwrites it.
– Backup Configuration—Downloads the Backup Configuration file and overwrites
it.
Downloading files:
Open the File Download from Server page.
1
Define the file type to download.
2
Define the TFTP Server IP Address, Source File Name, and Destination File fields.
3
Click Apply Changes. The software is downloaded to the device.
4
NOTE: To activate the selected Image file, reset the device. For information on resetting the
"Resetting the
device, see
Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the File Download from Server page.
CLI Command
copy source-url
destination-url [snmp]
The following is an example of the CLI commands:
console# copy running-config tftp://11.1.1.2/pp.txt
NOTE: Each ! indicates that ten packets were successfully transferred.
Accessing file 'file1' on 172.16.101.101.
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!! [OK]
Device".
Description
Copies any file from a source to a
destination.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
179