CLI Command
mac access-list name
permit {any | {host source
source-wildcard} any |
{destination
destination-
wildcard}}[vlan vlan-id]
deny [disable-port] {any |
{source source-
wildcard} any |
{destination
destination-
wildcard}}[vlan vlan-id]
The following is an example of the CLI commands:
Console (config)# mac access-list dell
Console (config-mac-al)# permit 6.6.6.6.6.6 0.0.0.0.0.0 any vlan 4
Console (config-mac-al)# deny 6.6.6.6.6.6 0.0.255.255.255.255
Binding ACLs
The ACL Bindings page allows network managers to assign ACL Lists to interfaces. To
open the ACL Bindings page:
•
Select Switch > Network Security > ACL Bindings. The ACL Bindings page opens.
NOTE: ACLs have no effect unless attached to an interface.
Description
Creates Layer 2 MAC ACLs, and
enters to MAC-Access list
configuration mode.
Allows traffic if the conditions
defined in the permit statement are
matched.
Allows traffic if the conditions
defined in the permit statement are
matched.
Configuring Switch Infor mation
205