Viewing Gvrp Statistics Using The Cli Commands - Dell PowerConnect 3324 User Manual

• Join Empty—Displays the device GVRP Join Empty statistics.
• Empty—Displays the device GVRP Empty statistics.
• Leave Empty—Displays the device GVRP Leave statistics.
• Join In—Displays the device GVRP Join In statistics.
• Leave In—Displays the device GVRP Leave in statistics.
• Invalid Protocol ID—Displays the device GVRP Invalid Protocol ID statistics.
• Invalid Attribute Type—Displays the device GVRP Invalid Attribute ID statistics.
• Invalid Attribute Value—Displays the device GVRP Invalid Attribute Value statistics.
• Invalid PDU Length—Displays the device GVRP Invalid PDU length statistics.
• Invalid Attribute Length—Displays the device GVRP Invalid Attribute Length
statistics.
• Invalid Events—Displays the device GVRP Invalid Events statistics.
Displaying GVRP statistics for a port:
Open the GVRP Statistics page.
1
Select Port in the Interface field.
2
Click Query. The port GVRP statistics are displayed.
3
Displaying GVRP statistics for a LAG:
Open the GVRP Statistics page.
1
Select LAG in the Interface field.
2
Click Query. The LAG GVRP statistics are displayed.
3

Viewing GVRP Statistics Using the CLI Commands

For information about viewing the GVRP instructions on a per-port basis, see the Port
Statistics page. The following table describes the CLI commands.
CLI Command
show gvrp statistics [ethernet
interface | port-channel
port-channel- number]
Description
Displays GVRP statistics.
View ing Statistics
305