Configuring Gvrp - Dell PowerConnect 3324 User Manual

CLI Command
switchport general pvid
vlan-id
switchport general allowed
vlan add vlan-list
[tagged | untagged]
switchport general allowed
vlan remove vlan-list
[tagged | untagged]
switchport general
acceptable-frame-types
tagged-only
switchport general ingress-
filtering off
The following is an example of the CLI commands:
Console (config)# interface port channel 1 1/e8
Console (config-if)# switchport mode access
console (config-if)# switchport LAG native vlan 123
Console (config-if)# switchport general pvid 234
Console (config-if)# switchport general allowed vlan add 1,2,5,6
tagged
Console (config-if)# switchport general acceptable-frame-types
tagged-only
Console (config-if)# switchport general ingress-filtering

Configuring GVRP

The GARP VLAN Registration Protocol (GVRP) protocol is specifically provided for
automatic distribution of VLAN membership information among VLAN-aware bridges.
GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping,
without having to individually configure each bridge, and to register VLAN membership.
To minimize the memory requirements when running the GVRP protocol, two proprietary
tuning variables have been added to the standard variables:
• Maximum number of GVRP VLANs—Displays the number of GVRP VLANs allowed
to participate in GVRP operation.
Description
Configure the Port VLAN ID (PVID) when
the interface is in general mode.
Adds VLANs to a general port.
Removes VLANs from a general port.
Discards untagged frames at ingress.
Disables port ingress filtering.
disable
Configuring Switch Infor mation
267