Dell PowerConnect 3324 User Manual page 214

The following table summarizes the equivalent CLI commands for configuring ports as
displayed in the Port Configuration.
CLI Command
interface ethernet interface
description string
shutdown
set interface active {ethernet
interface | port-channel port-
channel-number}
speed {10 | 100 | 1000}
duplex {half | full}
negotiation
back-pressure
flowcontrol {auto | on | off | rx |
tx}
mdix {on | auto}
show interfaces configuration
[ethernet interface | port-
channel port-channel-
number]
show interfaces status [ethernet
interface | port-channel port-
channel-number]
214 Configuring Switch Infor m ation
Description
Enters the interface configuration
mode to configure an ethernet type
interface.
Adds a description to an interface
configuration.
Disables interfaces that are part of
the currently set context.
Reactivates an interface that is shut
down due to security reasons.
Configures the speed of a given
ethernet interface when not using
auto negotiation.
Configures the full/half duplex
operation of a given ethernet
interface when not using auto
negotiation.
Enables auto negotiation operation
for the speed and duplex parameters
of a given interface.
Enables Back Pressure on a given
interface.
Configures the Flow Control on a
given interface.
Enables automatic crossover on a
given interface or Port-channel.
Displays the configuration for all
configured interfaces.
Displays the status for all configured
interfaces.