Dell PowerConnect 3324 User Manual page 219

– Half—The interface supports transmission between the device and the client in
only one direction at a time.
• Flow Control—Indicates if Flow Control is enabled on the LAG. The possible values
are:
– Off—Disables Flow Control on the LAG. This is the default value.
– On—Enables Flow Control on the LAG.
– Auto-negotiation—Enables auto negotiation of Flow Control on the LAG.
• Current Flow Control—Indicates the current Flow Control setting. The possible
values are:
– Off
– On
– Auto-negotiation
Defining LAG parameters:
Open the LAG Configuration page.
1
Select a LAG in the LAG field.
2
Define the Description, Admin Status, Port Speed, Admin Auto Negotiation, Admin
3
Speed, and/or Admin Flow Control fields.
Click Apply Changes. The LAG parameters are saved to the device.
4
Modifying LAG parameters:
Open the LAG Configuration page
1
Select a LAG in the LAG field.
2
Modify the Description, Admin Status, Port Speed, Admin Auto Negotiation, Admin
3
Speed, and/or Admin Flow Control fields.
Click Apply Changes. The LAG parameters are saved to the device.
4
Displaying the LAG Configuration Table:
Open the LAG Configuration page.
1
Click Show All. The LAG Configuration Table opens.
2
Configuring Switch Infor mation
219