Dell PowerConnect 3324 User Manual page 61

NOTE: 9600 is the default baud rate for new device. If using 9600 baud rate does not result in
viewing the device terminal, try another baud rate setting (the device may be set at a different
baud rate).
Use an F2F Null Modem cable to connect the PC running the ASCII terminal to the
3
device.
Insert the device's power cord into an electrical outlet to power up the device. The
4
following screen is displayed:
**************************************************
*****************
**************************************************
SYSTEM RESET *****************
C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h
61