Table of Contents
Advertisement
•
Current Port Status—Specifies the port operational status. The possible field values
are:
–
–
•
Re-Activate Suspended Port—Reactivates a port if the port has been disabled through
the Locked Port or ACL security options.
•
Operational Status—Indicates the port operational status.
•
Admin Speed—Specifies at what rate the port is running. This value can be specified
only if the port is disabled. The possible field values are:
–
–
–
•
Current Port Speed—Specifies the synchronized port speed in bps. The possible field
values are:
–
–
–
•
Admin Duplex—Specifies the synchronized port duplex mode in bps. When Admin
Duplex is set to full, Head-of-Line blocking is operational on the selected port. The
possible fields values are:
–
–
•
Current Duplex Mode— Specifies the synchronized port duplex mode. The possible
field values are:
–
–
•
Auto Negotiation—Enables Auto Negotiation on the device. Auto-negotiation is a
protocol between two link partners that enables a port to advertise its transmission
rate, duplex mode, and flow control abilities to its partner. The possible field values
are:
–
210
Configuring Switch Infor m ation
Up—Indicates the port is currently operating.
Down—Indicates the port is currently non-operational.
10M
100M
1000M
10M
100M
1000M
Full—The interface supports transmission between the device and the client in
both directions simultaneously. This is the default value.
Half—The interface supports transmission between the device and the client in
only one direction at a time.
Full
Half
Enable—Enables auto negotiation on the port.
Hide quick links:
Advertisement
Table of Contents
