Viewing Gvrp Statistics Using The Cli Commands - Dell PowerConnect 3324 User Manual

15 Sec—Indicates that the GVRP statistics are refreshed every 15 seconds.
¡
30 Sec—Indicates that the GVRP statistics are refreshed every 30 seconds.
¡
60 Sec—Indicates that the GVRP statistics are refreshed every 60 seconds.
¡
No Refresh—Indicates that the GVRP statistics are not automatically refreshed.
¡
Join Empty—Displays the device GVRP Join Empty statistics.
l
Empty—Displays the device GVRP Empty statistics.
l
Leave Empty—Displays the device GVRP Leave statistics.
l
Join In—Displays the device GVRP Join In statistics.
l
Leave In—Displays the device GVRP Leave in statistics.
l
Invalid Protocol ID—Displays the device GVRP Invalid Protocol ID statistics.
l
Invalid Attribute Type—Displays the device GVRP Invalid Attribute ID statistics.
l
Invalid Attribute Value—Displays the device GVRP Invalid Attribute Value statistics.
l
Invalid PDU Length—Displays the device GVRP Invalid PDU length statistics.
l
Invalid Attribute Length—Displays the device GVRP Invalid Attribute Length statistics.
l
Invalid Events—Displays the device GVRP Invalid Events statistics.
l
Displaying GVRP statistics for a port:
1. Open the GVRP Statistics page.
2. Select Port in the Interface field.
3. Click Query. The port GVRP statistics are displayed.
Displaying GVRP statistics for a LAG:
1. Open the GVRP Statistics page.
2. Select LAG in the Interface field.
3. Click Query. The LAG GVRP statistics are displayed.

Viewing GVRP Statistics Using the CLI Commands

For information about viewing the GVRP instructions on a per-port basis, see the Port Statistics page. The following table describes the CLI commands.
CLI Command
show gvrp statistics [ethernet interface | port-channel port-channel- number]
show gvrp error-statistics [ethernet interface| port-channel port-channel-number]
The following is an example of the CLI commands:
Console# show gvrp statistics
GVRP statistics:
----------------
Description
Displays GVRP statistics.
Displays GVRP error statistics.