Table of Contents
Advertisement
4. Select Use the following IP address option.
5. In the Internet Protocol (TCP/IP) properties windows define statically (not via DHCP) an IP address, Mask and default gateway for the PC.
NOTE:
If the PC is connected to a router and not directly to PowerConnect 3324/3348 device, the default gateway must be configured as the IP
address of the router interface connected to the PC (which leads to the PowerConnect device).
Telnet access
Use windows/DOS command line or a telnet application to access the device via a telnet. Remember to enter the appropriate password. The connection is
done with the IP address defined on the device.
Once Access is granted, command usage is the same as in direct device management:
1. Under Windows click Start>Run and enter the command cmd. The standard windows command line interface is displayed.
2. Enter the command Telnet and the device IP address.
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>telnet 50.1.1.2
01-Jan-2000 02:40:23 %MSCM-I-NEWTERM: New TELNET connection from 50.1.1.2
User Name:Dell
Password:****
console# show ip interface
Advertisement
Table of Contents
