Defining GVRP Ports:
1. Open the GVRP Parameters page.
2. Click Show All. The GVRP Parameters page opens. The GVRP Port Parameters contains parameters for enabling GVRP on a port and permitting port
to participate in VLAN registration through GVRP. In addition, the GVRP Port Parameters Table also contains information about the VLAN registration
mode. Specific ports can also be blocked from registering or being used in a VLAN.
3. Select a port.
4. Define the GVRP State, Dynamic VLAN Creation, VLAN Registration, and the GVRP Registration fields.
5. Click Apply Changes. GVRP is enabled on the port, parameters are defined, and the device is updated.
Displaying the GVRP Port Parameters Table:
1. Open the GVRP Parameters page.
2. Click Show All. The GVRP Port Parameters Table opens.
GVRP Port Parameters Table
In addition to the field displayed in the GVRP Parameters page , the GVRP Port Parameters Table page also displays the following fields:
Unit—Indicates the stacking unit number for which the GVRP information is displayed.
l
Copy Parameters From—Indicates the specific interface from which the GVRP parameters are copied.
l
Copy To—Indicates the ports to which the GVRP parameters are copied.
l
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed in the GVRP Parameters page.
CLI Command
gvrp enable
gvrp enable
gvrp vlan-creation-forbid
gvrp registration-forbid
show gvrp configuration [ethernet interface | port-
channel port-channel-number]
gvrp max-vlan number
The following is an example of the CLI commands:
Console (config)# gvrp enable
Description
Enables GVRP globally.
Enables GVRP on an interface.
Enables or disables dynamic VLAN creation.
Unregisters all VLANs, and prevents dynamic VLAN creation or registration on the port.
Displays GVRP configuration information, including timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP.
Configures the maximum number of VLANs when GVRP is enabled.