Table of Contents
Advertisement
Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the File Download from Server page.
CLI Command
copy source-url destination-url [snmp] Copies any file from a source to a destination.
The following is an example of the CLI commands:
console# copy running-config tftp://11.1.1.2/pp.txt
NOTE:
Each ! indicates that ten packets were successfully transferred.
Accessing file 'file1' on 172.16.101.101.
Loading file1 from 172.16.101.101: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!
[OK]
Copy took 0:01:11 [hh:mm:ss]
Uploading Files
The File Upload to Server page contains fields for uploading the software from the TFTP server to the device. The Image file can also be uploaded from the
File Upload to Server page. To open the File Upload to Server page:
Click System > File Management > File Upload in the Tree View. The File Upload to Server page opens:
l
Description
Advertisement
Table of Contents
