Defining IP Interfaces
The IP Interface Parameters page contains parameters for assigning IP addresses to interfaces. To open the IP Interface Parameters page:
Click System > IP Addressing > IP Interface Parameters in the Tree View. The IP Interface Parameters page opens.
l
IP Interface Parameters Page
The IP Interface Parameters page contains the following fields:
IP Address—Indicates the list of interface IP address.
l
Interface—Specifies the interface type for which the selected IP address is defined. The possible field values are:
l
Port—Indicates that the IP address was assigned to a port.
¡
LAG—Indicates that the IP address was assigned to a Link Aggregated Group (LAG).
¡
VLAN—Indicates that the IP address was assigned to a VLAN.
¡
Type—Indicates whether the IP address was defined manually as a static IP address or automatically through DHCP.
l
Remove—Removes the selected interface from the IP Address drop-down list.
l
Checked—Removes the interface from the IP Address drop-down list.
¡
Unchecked—Maintains the interface in the IP Address drop-down list.
¡
Adding an IP Interface:
1. Open the IP Interface Parameters page.
2. Click Add. The Add a Static IP Interface page opens: