Defining Lacp Parameters - Dell PowerConnect 3324 User Manual

The port does not belong to any other LAG.
l
The port is not a mirrored port.
l
The port's 802.1p priority is equal to the LAG's 802.1p priority.
l
No ACL is defined on the port.
l
QoS Trust in not disabled on the port.
l
GVRP is not enabled.
l
NOTE: Ports can be configured as LACP ports only if the ports are not part of a previously configured LAG.
PowerConnect 3324/3348 uses a hash function to determine which frames are carried on which aggregated-link member. The hash function statistically load-
balances the aggregated link members. PowerConnect 3324/3348 considers an aggregated link to be a single logical port.
Each aggregated link has an aggregated link port type, including Gigabit Ethernet ports and Fast Ethernet ports. Ports can be added to an aggregated link
only if they are the same port type. When ports are removed from an aggregated link, the ports revert to the original port settings. To open the Link
Aggregation page:
Click Switch > Link Aggregation in the Tree View. The Link Aggregation page opens.
l
Link Aggregation Page
This section includes the following topics:
Defining LACP Parameters
l
Defining LAG Membership
l

Defining LACP Parameters