Table of Contents
Advertisement
2. Select Enable in the SNMP Trap drop-down list.
3. Define the Select Recipient IP, Traps, and Community String fields.
4. Click Apply Changes. SNMP traps are enabled on the device.
Enabling Authentication Traps on the device:
1. Open the SNMP Trap Settings page.
2. Select Enable in the Authentication Trap drop-down list.
3. Define the Select Recipient IP, Traps, and Community String fields.
4. Click Apply Changes. Authentication traps are enabled on the device.
Adding a new Trap Recipient:
1. Open the SNMP Trap Settings page.
2. Click Add. The Add Trap Receiver/Manager page opens.
Add Trap Receiver/Manager Page
3. Define the Recipient IP Address, Community String, and Trap Enable fields. (Note that 0.0.0.0 means "All", and the traps are broadcast.)
4. Click Apply Changes. the Trap Recipient/Manager is added, and the device is updated.
Displaying the Trap Managers Table:
The Trap Managers Table contains fields for configuring trap types.
1. Open the Traps page.
2. Click Show All. The Traps Manager Table page opens.
Trap Managers Table Page
Deleting a Trap Manager Table entry:
1. Open the SNMP Trap Settings page.
2. Click Show All. The Traps Manager Table page opens.
Advertisement
Table of Contents
