General Settings Page
The General Settings page contains the following columns:
Attribute—The general setting attribute.
l
Current—The current value.
l
After Reset—The future (after reset) value. By entering a value in the After Reset column, memory is allocated to the field table.
l
The General Tuning page contains the following fields:
Max RAM Log Entries (1-400)—Indicates the maximum number of RAM Log entries. When the Log entries are full, the log is cleared and the Log file is
l
restarted.
Max VLANs when GVRP is enabled (1-256)—Defines the overall number of VLANs when GVRP is enabled.
l
NOTE:
The maximum number of GVRP VLANs includes all the VLANs participating in GVRP operation, whether they are static or dynamic VLANs.
Viewing RAM Log Entries Counter Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the General Settings page.
CLI Command
Description
logging buffered size number
Sets the number of syslog messages stored in the internal buffer (RAM).
gvrp max vlan
Configures the maximum number of VLANs when GVRP is enabled.
The following is an example of the CLI commands: