Etherlike Statistics Page
The Etherlike Statistics page contains the following fields:
Interface—Specifies the interface type for which the statistics are displayed.
l
Port—Indicates port statistics are displayed.
¡
LAG—Indicates LAG statistics are displayed.
¡
Refresh Rate—Indicates the amount of time that passes before the interface statistics are refreshed. The possible field values are:
l
15 Sec—Indicates that the Etherlike statistics are refreshed every 15 seconds.
¡
30 Sec—Indicates that the Etherlike statistics are refreshed every 30 seconds.
¡
60 Sec—Indicates that the Etherlike statistics are refreshed every 60 seconds.
¡
No Refresh—Indicates that the Etherlike statistics are not automatically refreshed.
¡
Alignment Errors—Displays the amount of alignment errors received on the selected interface.
l
Frame Check Sequence (FCS) Errors—Displays the amount of Frame Check Sequence errors received on the selected interface.
l
Single Collision Frames—Displays the amount of Single Collisions Frames errors received on the selected interface.
l
Multiple Collision Frames—Displays the amount of Multiple Collisions Frames errors received on the selected interface.
l
Deferred Transmissions—Displays the amount of deferred transmissions on the selected interface.
l
Late Collision—Displays the amount of late collisions received on the selected interface.
l
Excessive Collisions—Displays the amount of excessive collisions received on the selected interface.
l
Internal MAC Transmit Errors—Displays the amount of Internal MAC Transmit errors on the selected interface.
l
Carrier Sense Errors—Displays the amount of Carrier Sense errors on the selected interface.
l
Oversize Packets—Displays the amount of frame errors that are too long on the selected interface.
l
Internal MAC Receive Errors—Displays the amount of Internal MAC Received errors on the selected interface.
l
Symbol Errors—Displays the amount of Symbol errors on the selected interface.
l
Receive Pause Frames—Displays the amount of Received Pause frames on the selected interface (IEEE 802.3X).
l
Transmitted Paused Frames—Displays the amount of Transmitted Pause frames on the selected interface (IEEE 802.3X).
l