Enabling Igmp Snooping - Dell PowerConnect 3324 User Manual

3. Select a LAG in the Multicast Router Port Table and assign a value to the LAG.
4. Click Apply Changes. The LAG attached to the multicast router or group is updated.
Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands
The following table summarizes the equivalent CLI commands for managing LAGs and ports attached to multicast routers as displayed in the Bridge Multicast
Forward All page.
CLI Command
show bridge multicast filtering vlan-id
bridge multicast forbidden forward-all
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-
number-list}
The following is an example of the CLI commands:
Console # show bridge multicast filtering
Filtering: Enabled
VLAN: 1
Port Forward-All
Static Status
------ --------- ------
1/e1 Forbidden Filter
1/e2 Forward Forward(s)
1/e3 - Forward(s)

Enabling IGMP Snooping

The IGMP Snooping page allows network managers to add IGMP members. To open the IGMP Snooping page:
Click Switch > Multicast Support > IGMP Snooping in the Tree View. The IGMP Snooping page opens.
l
Description
Displays the multicast configuration.
Disables forwarding multicast packets on a port.
Enables forwarding of all multicast packets on a
port.