RMON History Table
NOTE:
Not all fields are shown in the RMON History Table.
The RMON History Table contains the following fields:
Sample No.—Indicates the specific sample that the information in the table reflects.
l
Drop Events—Indicates the number of dropped packets due to lack of network resources during the sampling interval. This may not represent the
l
exact number of dropped packets, but rather the number of times dropped packets were detected.
Received Bytes (Octets)—Indicates the number of data octets, including bad packets, received on the network.
l
Received Packets—Indicates the number of packets received during the sampling interval.
l
Broadcast Packets—Indicates the number of good broadcast packets received during the sampling interval.
l
Multicast Packets—Indicates the number of good multicast packets received during the sampling interval.
l
CRC Align Errors—Indicates the number of packets received during the sampling session with a length 64-1518 octets.that have a bad Frame Check
l
Sequence (FCS) with an integral number of octets or a bad FCS with a non-integral number.
Undersized Packets—Indicates the number of packets received that are less than 64 octets long during the sampling session.
l
Oversized Packets—Indicates the number of packets received that are more than 1518 octets long during the sampling session.
l
Fragments—Indicates the number of packets received that are less than 64 octets long and have a FCS during the sampling session.
l
Jabbers—Indicates the number of packets received that are more than 1518 octets long and had a FCS during the sampling session.
l
Collisions—Estimates the total number of packet collisions that occurred during the sampling session. Collisions are detected when repeater ports
l
detect two or more stations transmitting simultaneously.
Utilization—Estimates the main physical layer network Description on an interface during the session sampling. The value is reflected in percentages
l
with two decimal places.
Viewing statistics for a specific history entry:
1. Open the RMON History Table page.
2. Select a history entry in the History Table No. field. The entry statistics display in the RMON History Table.
Viewing RMON History Statistics Using the CLI Commands