Bridge Multicast Forward All Page
The Bridge Multicast Forward All page contains the following fields:
VLAN ID—Identifies a frame VLAN and contains information about the multicast group address.
l
Ports Table—Lists the port that can be added to a multicast service.
l
LAGs Table—Lists the LAGs that can be added to a multicast service.
l
The Bridge Multicast Forward All page contains the settings for managing switch and port settings.
Port Control Definition
D
Attaches the port to the multicast router or switch as a dynamic port.
S
Attaches the port to the multicast router or switch as a static port.
F
Indicates that the port if forbidden from joining a multicast group.
Blank
Indicates that the port is not attached to a multicast router or switch.
Bridge Multicast Forward All Router/Port Control Settings
Attaching a port to multicast router or switch:
1. Open Bridge Multicast Forward All page.
2. Define the VLAN ID field.
3. Select a port in the Multicast Router Port Table, and assign the port a value.
4. Click Apply Changes. The port attached to the multicast router or group is updated.
Attaching a LAG to multicast router or switch:
1. Open Bridge Multicast Forward All page.
2. Define the VLAN ID field.