Dynamic Address Table Page
The Dynamic Address page contains the following fields:
Address Aging—Specifies the amount of time the MAC Address remains in the Dynamic Address Table before it is timed out if no traffic from the source
l
is detected. The default value is 300 seconds.
Port—Specifies the port numbers for which the table is queried.
l
MAC Address—Specifies the MAC address for which the table is queried.
l
VLAN ID—Indicates the VLAN ID for which the table is queried.
l
Address Table Sort Key—Specifies the method by which the Dynamic Address Table is sorted. The possible field values are:
l
Address—Sorts the query results for a designated MAC address.
¡
VLAN—Sorts the query results by VLAN ID.
¡
Interface—Sorts the query results by interface, and displays all MAC addresses that have been learned on the designated port.
¡
The Query Results Table contains the following columns:
VLAN ID—Indicates the VLAN Tag value.
l
MAC—Indicates the MAC address.
l
Port—Indicate the port that is attached to the dynamic MAC address.
l
Type—Indicates the MAC address type.
l
Redefining the Aging Time:
1. Open the Dynamic Address Table.
2. Define the Aging Time field.
3. Click Apply Changes. The aging time is modified, and the device is updated.