Advanced Configuration; Retrieving An Ip Address From A Dhcp Server - Dell PowerConnect 3324 User Manual

config# configure
config(config)# snmp-server community private rw 11.1.1.2
config(config)# exit
config# show snmp
Community-String Community-Access IP address
-------------------- ---------------- ---------------
private readWrite 11.1.1.2
Traps are enabled.
Authentication-failure trap is enabled.
Trap-Rec-Address Trap-Rec-Community Version
---------------- -------------------- -------
System Contact:
System Location:
This completes the initial configuration of the device from a local terminal. The configured parameters enable further device configuration from any remote
location.

Advanced Configuration

This chapter contains information about dynamic allocation of IP addresses and security management based on the AAA (authentication, authorization and
accounting) mechanism. The chapter includes the following topics:
Configuring IP Addresses through DHCP.
l
Configuring IP Addresses through BOOTP.
l
Security Management and Password Configuration.
l
When configuring/receiving IP addresses through DHCP and BOOTP, the configuration received from these servers includes IP address, and may include
subnet mask and default gateway.

Retrieving an IP address from a DHCP Server