Table of Contents
Advertisement
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the QoS Global Settings page.
CLI Command
qos trust [cos | dscp | tcp-udp-port]
qos
no qos trust
The following is an example of the CLI commands:
Console (config)# qos
Console (config)# qos trust dscp
Defining QoS Interface Settings
The QoS Interface Settings page enables the user to define, per interface, if the selected Trust mode is to be activated. The default priority for incoming
untagged packets is also selected in the QoS Interface Settings page. To open the QoS Interface Settings page:
Click Quality of Service > Global Parameters > Interface Settings in the Tree View. The QoS Interface Settings page opens.
l
Description
Configures the system to basic mode and the trust state.
Enables QoS on the device.
Returns to the non-trust state.
Advertisement
Table of Contents
