Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Global
Settings page.
Table 9-109. QoS Settings CLI Commands
CLI Command
qos trust [cos | dscp]
no qos trust
The following is an example of the CLI commands:
console(config)# qos trust dscp
Defining QoS Interface Settings
The Interface Settings page contains fields for deactivating the Trust mode, and setting the default
CoS value on incoming untagged packets. To open the Interface Settings page, click Quality of
Service→ QoS Parameters → Interface Settings in the tree view.
Figure 9-2. Interface Settings
Description
Configures the system to trust mode.
Returns to the non-trusted state.
Configuring Quality of Service
377