Mapping Cos Values To Queues - Dell PowerConnect 3424 User Manual

Mapping CoS Values to Queues

The CoS to Queue page contains fields for classifying CoS settings to traffic queues. To open the
CoS to Queue page, click Quality of Service→ QoS Mapping→ CoS to Queue in the tree view.
Figure 9-3. CoS to Queue
The CoS to Queue page contains the following fields:
Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 7 is the
highest.
Queue — The queue to which the CoS priority is mapped. Four traffic priority queues are
supported.
Restore Defaults — Restores the device factory defaults for mapping CoS values to an egress
queue.
Mapping a CoS Value to a Queue
1
Open the CoS to Queue page.
2
Select a CoS entry.
3
Define the queue number in the Queue field.
4
Click Apply Changes.
The CoS value is mapped to an egress queue, and the device is updated.
Configuring Quality of Service
379