Dell PowerConnect 3424 User Manual page 211

Deleting Notification Recipients
1
Open Notification Recipients page.
2
Click Show All.
The Notification Recipients Tables page opens.
3
Select a notification recipient in either the SNMPV1,2 Notification Recipient or SNMPv3
Notification Recipient Tables.
4
Check the Remove checkbox.
5
Click Apply Changes.
The recipient is deleted, and the device is updated.
Configuring SNMP Notification Recipients Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Notification Recipients page.
Table 6-54. SNMP Community CLI Commands
CLI Command
snmp-server host { ipaddress |
hostname } community-string [traps |
informs] [1 | 2] [udp-port port ]
[filter filtername ] [timeout
seconds ] [retries retries ]
snmp-server v3-host {ip- address |
hostname } username [traps | informs]
{noauth | auth | priv} [udp-port
port ] [filter filtername ] [timeout
seconds ] [retries retries ]
show snmp
Description
Creates or updates a notification recipient
receiving notifications in SNMP version 1 or 2.
Creates or updates a notification recipient
receiving notifications in SNMP version 3.
Shows the current SNMP configuration
Configuring System Information
211