Dell PowerConnect 3424 User Manual page 259

In addition to the fields in the Storm Control page, the Storm Control Settings Table contains the
following additional fields:
Copy Parameters from Port — Indicates the specific port from which storm control parameters
are copied.
Copying Parameters in the Storm Control Settings Table
1
Open the Storm Control page.
2
Click Show All.
The Storm Control Settings Table opens.
3
Select the port from which settings are copied from the Copy Parameters from Port field.
4
Check the Copy to check box to define the interfaces to which the storm control definitions
are copied, or click Select All to copy the definitions to all ports.
5
Click Apply Changes.
The parameters are copied to the selected ports in the Storm Control Settings Table, and the
device is updated.
Configuring Storm Control with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Storm Control as
displayed on the Storm Control page.
Table 7-69. Storm Control CLI Commands
CLI Command
port storm-control
include-multicast
port storm-control
broadcast enable
port storm-control
broadcast rate
show ports storm-control
port
Description
Enables the device to count Multicast,
Unicast, and Broadcast packets together.
Enables broadcast storm control.
Configures the maximum broadcast rate.
Displays the storm control configuration.
Configuring Switch Information
259