Dell PowerConnect 3424 User Manual page 239

Action on Violation — The action to be applied to packets arriving on a locked port. The possible
field values are:
Forward — Forwards the packets from an unknown source, however, the MAC address is not
learned.
Discard — Discards the packets from any unlearned source. This is the default value.
Shutdown — Discards the packet from any unlearned source and shuts down the port. Ports
remained shut down until they are reactivated, or the device is reset.
Trap — Enables traps being sent when a packet is received on a locked port.
Trap Frequency (1-1000000) — The amount of time (in seconds) between traps. The default value
is 10 seconds.
Defining a Locked Port
1
Open the Port Security page.
2
Select an interface type and number.
3
Define the fields.
4
Click Apply Changes.
The locked port is added to the Port Security Table, and the device is updated.
Displaying the Port Security Table
1
Open the Port Security page.
2
Click Show All.
The Port Security Table opens:
Locked Ports are defined in the Port Security Table.
NOTE:
Figure 7-8. Port Security Table
Configuring Switch Information
239