Dell PowerConnect 3424 User Manual page 283

Table 7-75. STP Port Settings CLI Commands (continued)
CLI Command
spanning-tree portfast
show spanning-tree [detail]
[active | blockedports]
[instance instance-id ]
show spanning-tree mst-
configuration
The following is an example of the CLI commands:
console> enable
console# configure
Console(config)# interface ethernet 1/e1
Console(config-if)# spanning-tree disable
Console(config-if)# spanning-tree cost 35000
Console(config-if)# spanning-tree port-priority 96
Console(config-if)# spanning-tree portfast
Console(config-if)# exit
Console(config)# exit
Console# show spanning-tree ethernet 1/e15
Port 1/e15 enabled
State: forwarding
Port id: 128.15
Type: P2p (configured: Auto) Internal Port Fast: No (configured:
No)
Designated bridge Priority : 32768 Address: 00:00:00:16:00:64
Designated port id: 128.15
Guard root: Disabled
Number of transitions to forwarding state: 2
BPDU: sent 483, received 1037
Description
Enables PortFast mode.
Displays detailed spanning tree
information on active or blocked ports.
Displays spanning tree MST
configuration identifier.
Role: designated
Port cost: 19
Designated path cost: 4
Configuring Switch Information
283