Dell PowerConnect 3424 User Manual page 335

Enabling IGMP Snooping on the device
1
Open the IGMP Snooping page.
2
Select the VLAN ID for the device on which IGMP snooping needs to be enabled.
3
Select Enable in the IGMP Snooping Status field.
4
Complete the fields on the page.
5
Click Apply Changes.
IGMP snooping is enabled on the device.
Displaying the IGMP Snooping Table
1
Open the IGMP Snooping.
2
Click Show All.
The IGMP Snooping Table opens.
Configuring IGMP Snooping with CLI Commands
The following table summarizes the equivalent CLI commands for configuring IGMP Snooping on
the device:
Table 7-94. IGMP Snooping CLI Commands
CLI Command
ip igmp snooping
ip igmp snooping mrouter learn-
pim-dvmrp
ip igmp snooping host-time-out
time-out
ip igmp snooping mrouter-time-
out time-out
ip igmp snooping leave-time-out
{ time-out | immediate-leave}
show ip igmp snooping groups
[vlan vlan-id ] [address ip-mul-
ticast-address ]
show ip igmp snooping interface
vlan-id
show ip igmp snooping mrouter
[interface vlan-id]
Description
Enables Internet Group Membership Proto-
col (IGMP) snooping.
Enables automatic learning of Multicast
router ports in the context of a specific
VLAN.
Configures the host-time-out.
Configures the mrouter-time-out.
Configures the leave-time-out.
Displays the Multicast groups learned by
IGMP snooping.
Displays IGMP snooping configuration.
Displays information about dynamically
learned Multicast router interfaces.
Configuring Switch Information
335