Dell PowerConnect 3424 User Manual page 290

Table 7-77. RSTP Settings CLI Command
CLI Command
spanning-tree link-type
{point-to-point |
shared}
spanning tree mode {stp |
rstp | mstp}
clear spanning-tree
detected-protocols
[ethernet interface |
port-channel port-
channel-numbe r]
show spanning-tree
[ethernet interface |
port-channel port-
channel-number ]
The following is an example of the CLI commands:
console(config)# interface ethernet 1/e5
console(config-if)# spanning-tree link-type shared
console(config-if)# spanning tree mode rstp
290
Configuring Switch Information
Description
Overrides the default link-type setting.
Configure the spanning tree protocol currently
running.
Restarts the protocol migration process.
Displays spanning tree configuration.