Defining VLAN Membership
The VLAN Membership page contains fields for defining VLAN groups. The device supports the
mapping of 4094 VLAN IDs to 256 VLANs. All ports must have a defined PVID. If no other value
is configured the default VLAN PVID is used. VLAN ID #1 is the default VLAN, and cannot be
deleted from the system. To open the VLAN Membership page, click Switch
Membership in the tree view.
Figure 7-30. VLAN Membership
The VLAN Membership page contains the following fields:
Show VLAN — Lists and displays specific VLAN information according to VLAN ID or VLAN
name.
VLAN Name (0-32 Characters) — The user-defined VLAN name.
Status — The VLAN type. Possible values are:
Dynamic — The VLAN was dynamically created through GVRP.
Static — The VLAN is user-defined.
Default — The VLAN is the default VLAN.
Authentication Not Required— Enables or disables unauthorized users from accessing a VLAN.
Remove VLAN — When selected, removes the VLAN from the VLAN Membership Table.
300
Configuring Switch Information
→
→
VLAN
VLAN