Dell PowerConnect 3424 User Manual page 262

Adding a Port Mirroring Session
1
Open the Port Mirroring page.
2
Click Add.
The Add Source Port page opens.
3
Define the Source Port and the Type fields.
4
Click Apply Changes.
5
Select the destination port from the Destination Port drop-down menu.
6
Click the Refresh button Port Mirroring page.
7
Define the Tagged Packets field.
8
Define the Type field.
9
Click Apply Changes.
The new source port is defined, and the device is updated.
Deleting a Copy Port from a Port Mirroring Session
1
Open the Port Mirroring page.
2
Select the Remove check box.
3
Click Apply Changes.
The selected port mirroring session is deleted, and the device is updated.
Configuring a Port Mirroring Session Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring a Port Mirroring
session as displayed in the Port Mirroring page.
Table 7-70. Port Mirroring CLI Commands
CLI Command
port monitor src-interface [rx | tx]
262
Configuring Switch Information
Description
Starts a port monitoring session.