Dell PowerConnect 3424 User Manual page 201

Displaying the User Security Model Table
1
Open the SNMPv3 User Security Model (USM) page.
2
Click Show All.
The User Security Model Table opens:
Figure 6-66. User Security Model Table
Deleting an User Security Model Table Entry
1
Open the SNMPv3 User Security Model (USM) page.
2
Click Show All.
The User Security Model Table opens.
3
Select a User Security Model Table entry.
4
Check the Remove checkbox.
5
Click Apply Changes.
The User Security Model Table entry is deleted, and the device is updated.
Defining SNMPv3 Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 User Security Model (USM) page.
Table 6-51. SNMPv3 User CLI Commands
CLI Command
snmp-server user username
groupname [remote engineid-
strin g][auth-md5 password |
auth-sha password | auth-
md5-key md5-des-key | auth-
sha-key sha-des-key ]
show snmp users [ username ]
Description
Configures a new SNMP V3 user.
Displays the configuration of users.
Configuring System Information
201