Figure 6-10. Add Authentication Key
3
Define the fields.
4
Click Apply Changes.
The SNMP authentication key is added, and the device is updated.
Displaying the Authentication Key Table
1
Open the SNTP Authentication page.
2
Click Show All.
The Authentication Key Table opens:
Figure 6-11. Authentication Key Table
Deleting the Authentication Key
1
Open the SNTP Authentication page.
2
Click Show All.
The Authentication Key Table opens.
3
Select an Authentication Key Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The entry is removed, and the device is updated.
Configuring System Information
115