Dell PowerConnect 3424 User Manual page 160

Figure 6-41. Profile Rules Table
Removing a Rule
1
Open the Access Profiles page.
2
Click Show All.
The Profile Rules Table page opens.
3
Select a rule.
4
Select the Remove check box.
5
Click Apply Changes.
The selected rule is deleted, and the device is updated.
Defining Access Profiles Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Access Profiles page.
Table 6-39. Access Profiles CLI Commands
CLI Command
management access-list name
permit [ethernet interface-
number | vlan vlan-id | port-
channel number] [service
service]
permit ip-source ip-address
[mask mask | prefix-length]
[ethernet interface-number |
vlan vlan-id | port-channel
number] [service service]
160
Configuring System Information
Description
Defines an access-list for management, and enters the
access-list context for configuration.
Sets port permitting conditions for the management
access list.
Sets port permitting conditions for the management
access list, and the selected management method.