Figure 6-38. Access Profiles
The Access Profiles page contains following fields:
Access Profile — User-defined Access Profile lists. The Access Profile list contains a default value
of Console Only. When this access profile is selected, active management of the device is
performed using the console connection only.
Current Active Access Profile — The access profile that is currently active.
Set Access Profile Active — Activates an access profile.
Remove — Removes an access profile from the Access Profile Name list, when selected.
Activating a Profile
1
Open the Access Profiles page.
2
Select an Access Profile in the Access Profile field.
3
Select the Set Access Profile Active check box.
4
Click Apply Changes.
The Access Profile is activated.
Adding an Access Profile
Rules act as filters for determining rule priority, the device management method, interface type,
source IP address and network mask, and the device management access action. Users can be
blocked or permitted management access. Rule priority sets the order in which the rules
are implemented.
Configuring System Information
157