Dell PowerConnect 3424 User Manual page 136

The Default Gateway page contains the following fields:
User Defined — The device's Gateway IP address.
Active — Indicates if the Gateway is active.
Remove User Defined — Removes the device's Gateway from the Default Gateway drop-down
list, when selected.
Selecting a Device's Gateway:
1
Open the Default Gateway page.
2
Select an IP address in the Default Gateway drop-down list.
3
Select the Active check box.
4
Click Apply Changes.
The device's Default Gateway is selected and the device is updated.
Removing a Device's Default Gateway Device:
1
Open the Default Gateway page.
2
Select the Remove check box to remove default gateways.
3
Click Apply Changes.
The default gateway entry is removed, and the device is updated.
Defining a Device's Gateway Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Default Gateway page
.
Table 6-30. Default Gateway CLI Commands
CLI Command
ip default-gateway ip-address Defines a default gateway.
no ip default-gateway
The following is an example of the CLI commands:
console(config)# ip default-gateway 196.210.10.1
console(config)# no ip default-gateway
136
Configuring System Information
Description
Removes a default gateway.