Dell PowerConnect 3424 User Manual page 108

Switching Between Stack Masters
1
Open the Stack Management page.
2
Check the Switch Stack Control from Unit 1 to Unit 2 check box.
3
Click Apply Changes.
A confirmation message displays.
4
Click OK.
The device is reset. After the device is reset, a prompt for a user name and password displays.
Configuring Stack Display Order
1
Open the Stack Management page.
2
Define the stack topology by defining the top and bottom units. These units should be
neighbors.
3
Click Apply Changes.
The display order is reconfigured on the System page.
Managing Stacks Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Stack Management page.
Table 6-18. Stack Management CLI Commands
CLI Command
reload
stack reload
stack master
The following is an example of the CLI commands:
console# reload
Are you sure you want to erase running configuration (y/n) [n]
108
Configuring System Information
Description
Reloads the operating system.
Reloads stack members.
Forces the selection of stack master