Dell PowerConnect 3424 User Manual page 238

Figure 7-7. Port Security
The Port Security page contains the following fields:
Interface — The selected interface type on which Locked Port is enabled.
Port — The selected interface type is a port.
LAG — The selected interface type is a LAG.
Current Port Status — The currently configured Port status.
Set Port — The port is either locked or unlocked. The possible field values are:
Unlocked — Unlocks Port. This is the default value.
Locked — Locks Port.
Learning Mode — Defines the locked port type. The Learning Mode field is enabled only if
Locked is selected in the Set Port field.The possible field values are:
Classic Lock — Locks the port using the classic lock mechanism. The port is immediately
locked, regardless of the number of addresses that have already been learned.
Limited Dynamic Lock — Locks the port by deleting the current dynamic MAC addresses
associated with the port. The port learns up to the maximum addresses allowed on the port.
Both relearning and aging MAC addresses are enabled.
Max Entries — Specifies the number of MAC address that can be learned on the port. The Max
Entries field is enabled only if Locked is selected in the Set Port field. In addition, the Limited
Dynamic Lock mode is selected. The default is 1.
238
Configuring Switch Information