Defining Queue Settings - Dell PowerConnect 3324 User Manual

qos cos default-cos Configures the default port CoS value.
no qos trust Disables Trust state on each port.
The following is an example of the CLI commands:
Console (config)# interface ethernet 1/e5
Console (config-if)# qos trust
Console (config-if)# qos cos 3

Defining Queue Settings

The Queue Settings page allows network administrators to configure Weighted Round Robin (WRR), as well as assign bandwidth values for queues. Each
queue is configured with different WRR and Weighted Random Early Detection (WRED) values. To open the Queue Settings page:
Select Quality of Service > Global Parameters > Queue Settings in the Tree View. The Queue Settings page opens.
l
Queue Setting Page
The Queue Settings page contains the following fields:
Queues—Indicates the queue number.
l
NOTE: Overloading a queue may cause network congestion.
Strict Priority—Specifies if traffic scheduling is based strictly on the queue priority. The default is enabled.
l
WRR—Specifies if traffic scheduling for the queue is based on the WRR scheme.
l