Table of Contents
Advertisement
File Upload to Server Page
The File Upload to Server page contains the following fields:
Firmware Upload—Indicates that the Firmware file is uploaded. If Firmware Upload is selected, the Configuration Upload fields are grayed out.
l
Configuration Upload—Indicates that the Configuration file is uploaded. If Configuration Upload is selected, the Software Image Upload fields are
l
grayed out.
Software Image Upload TFTP Server IP Address—Indicates the TFTP Server IP Address to which the Software Image is uploaded.
l
Software Image Upload Destination—Specifies the Software Image file path to which the file is uploaded.
l
Configuration Upload TFTP Server IP Address—Indicates the TFTP Server IP Address to which the Configuration file is uploaded.
l
Configuration Upload Destination—Specifies the Configuration file path from which the file is uploaded.
l
Configuration Upload Transfer file name—Indicates the software file to which the configuration is uploaded. The possible field values are:
l
Running Configuration—Uploads the Running Configuration file.
¡
Startup Configuration—Uploads the Startup Configuration file.
¡
Backup Configuration—Uploads the Backup file.
¡
Uploading files:
1. Open the File Upload to Server page.
2. Define the file type to upload.
3. Define the TFTP Server IP Address, Destination, and Transfer file name fields.
4. Click Apply Changes. The software is uploaded to the device.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the File Upload to Server page.
Advertisement
Table of Contents
