Table of Contents
Advertisement
Default Gateway Page
The Default Gateway page contains the following fields:
Default Gateway—Indicates the Gateway device IP address.
l
Active—Indicates if the default Gateway device specified in the Default Gateway drop-down list is currently active. The possible field values are:
l
Checked—Indicates the Gateway device is currently active.
¡
Unchecked—Indicates the Gateway device is not currently active.
¡
Remove—Removes Gateway devices from the Default Gateway drop-down list.
l
Checked—Removes the selected Gateway devices from the Default Gateway drop-down list.
¡
Unchecked—Maintains Gateway devices in the Default Gateway drop-down list.
¡
Selecting a Gateway device:
1. Open the Default Gateway page.
2. Select an IP address in the Default Gateway drop-down list.
3. Check the Active check box.
4. Click Apply Changes. The Gateway device is selected, and its status displays in the Active field.
Adding a Gateway device:
1. Open the Default Gateway page.
2. Click Add. The Add New Default Gateway page opens.
Advertisement
Table of Contents
