Table of Contents
Advertisement
2. Select a port mapping in the UDP Port List drop-down list. The queue to which the port is assigned displays in the Map to Queue drop-down list.
3. Select a new traffic queue in the Map to Queue drop-down list.
4. Click Apply Changes. The UDP mapping is reassigned to a different traffic queue.
Removing a UDP port mapping from a UDP to Traffic Mapping Table:
1. Open the UDP to Queue page.
2. Select a port mapping in the UDP Port List drop-down list. The queue to which the port is assigned displays in the Map to Queue drop-down list.
3. Check the Remove check box.
4. Click Apply Changes. The UDP port mapping is removed from the UDP to the Traffic Mapping Table.
Assigning UDP Ports to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the UDP to Queue page.
CLI Command
qos map udp-port-queue port1.port8 to queue-id
show qos map udp-port-queue
no qos map udp-port-queue
The following is an example of the CLI commands:
Console (config)# qos map udp-port-queue 2000 80 to 2
Console (config)# show qos map udp-port-queue
Back to Contents Page
Description
Modifies the UDP-Port to queue.
Displays the UDP-Port to queue.
Removes the UDP port from a queue.
Advertisement
Table of Contents
