RMON Events Log Page
The RMON Events Log page contains the following fields:
Event—Identifies the RMON Event Log entry number.
l
Log No.— Indicates the log number.
l
Log Time—Specifies the time at which the log entry was entered.
l
Description—Describes the log entry.
l
Viewing RMON Events Log Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the RMON Events Log page.
CLI Command
Description
rmon table-size log entries
Configures maximum number of log table entries.
show rmon log [event]
Displays the RMON logging table.
The following is an example of the CLI commands:
Console (config)# rmon table-size log 500
Console# show rmon log