Table of Contents
Advertisement
File Download From Server Page
The File Download from Server page contains the following fields:
Firmware Download—Indicates that the Firmware file is downloaded. If Firmware Download is selected, the Configuration Download fields are
l
grayed out.
Configuration Download—Indicates that the Configuration file is downloaded. If Configuration Download is selected, the Firmware Download fields
l
are grayed out.
Firmware Download TFTP Server IP Address—Indicates the TFTP Server IP Address from which files are downloaded.
l
Firmware Download Source File Name—Specifies the file to be downloaded.
l
Firmware Download Destination File—Indicates the destination file type to which to the file is downloaded. The possible field values are:
l
Software Image—Downloads the Image file.
¡
Boot Code—Downloads the Boot file.
¡
Configuration Download File TFTP Server IP Address—Indicates the TFTP Server IP Address through which the configuration files are downloaded.
l
Configuration Download File Source File Name—Specifies the configuration files to be downloaded.
l
Configuration Download File Destination—Indicates the destination file to which to the configuration files is downloaded. The possible field values are:
l
Running Configuration—Downloads commands into the Running Configuration files.
¡
Startup Configuration—Downloads the Startup Configuration file and overwrites it.
¡
Backup Configuration—Downloads the Backup Configuration file and overwrites it.
¡
Downloading files:
1. Open the File Download from Server page.
2. Define the file type to download.
3. Define the TFTP Server IP Address, Source File Name, and Destination File fields.
4. Click Apply Changes. The software is downloaded to the device.
NOTE:
To activate the selected Image file, reset the device. For information on resetting the device, see
"Resetting the
Device".
Advertisement
Table of Contents
