2. Select an authentication sequence in the HTTP field.
3. Click Apply Changes. HTTP sessions are assigned an authentication sequence.
Assigning Secure HTTP Sessions a Authentication Sequence:
1. Open the Select Authentication page.
2. Select an authentication sequence in the Secure HTTP field.
3. Click Apply Changes. Secure HTTP sessions are assigned an authentication sequence.
Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Select Authentication page.
CLI Command
enable authentication [default | list-
name]
login authentication [default | list-name]
ip http authentication method1 [method2.]
ip https authentication method1 [method2.]
show authentication methods
The following is an example of the CLI commands:
Console (config-line)# enable authentication default
Console (config-line)# login authentication default
Console (config-line)# exit
Console (config)# ip http authentication radius local
Console (config)# ip https authentication radius local
Console (config)# exit
Console# show authentication methods
Login Authentication Method Lists
---------------------------------
Default: Radius, Local, Line
Console_Login: Line, None
Description
Specifies the authentication method list when accessing a higher privilege level from a remote Telnet or
console.
Specifies the login authentication method list for a remote Telnet or console.
Specifies authentication methods for http servers.
Specifies authentication methods for https servers.
Displays information about the authentication methods.