Table of Contents
Advertisement
The following is an example of the CLI commands:
Console (config)# interface vlan 8
bridge multicast address 0100.5e02.0203
bridge multicast address 0100.5e02.0203 add ethernet 1/e1, 2/e2
Console (config-if)# Exit
Console # show bridge multicast address-table
Vlan MAC Address type Ports
---- -------------- ----- -------------------
1 0100.5e02.0203 static 1/e1, 2/e2
19 0100.5e02.0208 static 1/e1-8
19 0100.5e02.0208 dynamic 1/e9-11
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---- -------------- -------------------
1 0100.5e02.0203 2/e8
19 0100.5e02.0208 2/e8
Assigning Multicast Forward All Parameters
The Bridge Multicast Forward All page allows network managers to enable attaching ports or LAGs to a switch attached to a neighboring multicast
router/switch. Once IGMP snooping is enabled, multicast packets are forwarded to the appropriate port or VLAN.
Click Switch > Multicast Support > Bridge Multicast > Bridge Multicast Forward All Tab in the Tree View. The Bridge Multicast Forward All page
l
opens.
Advertisement
Table of Contents
