Table of Contents
Advertisement
Copying and Deleting Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Copy Files page.
CLI Command
delete startup-config
copy source-url destination-url [snmp]
The following is an example of the CLI commands:
Console# delete startup-config
This command will reset the whole system and disconnect your Telnet session. Do you want to continue (y/n) [n]?
Console # copy tftp://172.16.101.101/file1 image
Accessing file 'file1' on 172.16.101.101.
Loading file1 from
172.16.101.101: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!
[OK]
Copy took 0:01:11 [hh:mm:ss]
Defining Advanced Settings
Device Tuning is used to determine the maximum amount of entries allowed in the various tables listed. Changes are implemented only after the device is
reset. To open the Tuning page:
Click System > Advanced Settings in the Tree View. The Tuning page opens.
l
Description
Deletes the startup-config file.
Copies any file from a source to a destination
Advertisement
Table of Contents
